Hazen-Williams and Darcy-Weisbach flow simulator for PVC, copper, and PEX piping networks with dynamic pressure drop visualizations.
Hazen-Williams friction models, fluid velocity checks, and dynamic pressure gradients
Computes exact friction head loss (feet of water) and pressure drops (PSI) across PEX, PVC, Copper, Steel, and Cast Iron pipes.
Calculates feet-per-second (FPS) water velocity and flags cavitation erosion risks (>8 FPS) and sediment settling risks (<2 FPS).
Automatically factors in equivalent length resistance from 90°/45° elbows, tees, check valves, and isolation ball valves.
Keeping water speeds between 4 and 8 FPS prevents pipe internal erosion while avoiding particle deposition.
Fittings and valves disrupt smooth streamline flow, generating friction losses equivalent to multiple feet of straight pipe.
Water column height exerts 0.4335 PSI per vertical foot; pumping uphill directly reduces available outlet pressure.
Everything you need to know about Pipe Flow & Friction Head Loss
The Hazen-Williams equation calculates head loss due to friction in water pipes: hf = 0.002083 x L x (100/C)^1.852 x (Q^1.852 / d^4.8655), where L is pipe length in feet, C is the roughness coefficient, Q is flow rate in GPM, and d is inside diameter in inches.
Smooth plastics like PEX and Schedule 40 PVC use C = 150. Copper tubing uses C = 135 to 140. New galvanized steel uses C = 120, and cast iron uses C = 100.
In copper and PVC piping, water velocity should generally be kept below 8.0 FPS (and under 5.0 FPS for hot water lines) to prevent pipe wall erosion, acoustic whistling, and water hammer.
Explore rainwater harvesting planners, HVAC duct sizing calculators, and heat sink thermal tools.
Visualizes real-time pressure gradients along the entire pipe run length, including elevation head lift and pump water horsepower.
Each valve, elbow, and tee causes turbulent eddy resistance. The calculator uses the Equivalent Length method (L/D) to convert each fitting into an equivalent length of straight pipe (e.g. a 90° elbow adds ~30 pipe diameters of equivalent length).
For every 1 foot of vertical upward elevation gain, water pressure decreases by 0.4335 PSI (or ~2.31 feet of head per PSI). Conversely, downhill runs gain pressure at the same rate.
Water horsepower represents the theoretical minimum mechanical power required to pump a given flow rate against total dynamic head: WHP = (GPM x Total Head in Feet) / 3,960.
Nominal pipe size is an industry designation. Actual inside diameter depends on schedule and wall thickness (e.g. 1-inch Schedule 40 PVC has an actual internal diameter of 1.049 inches).
Yes! Click 'Export CSV' to download complete hydraulic tables containing pipe diameters, velocities, head losses, and pressure gradients, or click 'Snapshot' for chart graphics.
Undersized pipes lead to excessive pressure drops, poor fixture flow, noisy pipes, accelerated internal erosion, and significantly higher pumping electrical costs.
Hazen-Williams is calibrated for water around 60°F (15.5°C). For hot water or other fluids with varying viscosities, the Darcy-Weisbach equation with Reynolds number correction is applied.
The Hydraulic Grade Line represents the total fluid pressure head available along the length of a pipe network, showing the steady drop from inlet pressure to delivery outlet pressure.
No software installation is required. The Hydraulic Pipe Flow & Friction Head Loss Calculator runs client-side in your web browser using HTML5 Canvas and TypeScript.